In this article, we will teach you how to flash or install .fls firmware on Intel or RDAbased Android devices using the Intel Flash Tool E2. We will also guide you through the process of installing the .fls firmware on your Intel or RDA-based Android device.
What is .FLS Firmware?
The .fls Firmware is a type of firmware file used by Intel or RDA-based Android devices. It stores information about the layout of files on the device, including the location of system files, the partition table, and other important information.
The .fls file is used to update the device’s firmware and is typically stored in its internal memory. It can also be used to restore the device to its factory settings.
How to install FLS Firmware
In order to install the .FLS firmware, please ensure that you have installed the drivers
and tools beforehand.
Disclaimer: mobilehelpfull.com will not be held responsible for any device
damage resulting while/after following this guide. Proceed with caution!
Steps to install FLS Firmware
Step 1: Open Intel Flash Tool E2 on the computer. Once the Intel Flash Tool E2 is launched, you can see the following window
Step 2: Under Add file, Click on the Browse button.
Step 3: Locate the FLS File on your computer. You can find the FLS file inside the Stock
Firmware of your device.
Step 4: Click on the Files to Download Checkbox to Select all the loaded files.
Step 5: Connect your Mobile device to the computer using the USB Cable (make sure the
device is Power Off):
Step 6: Click on the Next button to Start the flashing or installation process
Step 7: Once the flashing or installation process is completed, you will get the success
message at the end.
Congratulations! You have just learned how to flash or install .FLS Firmware on Intel or
RDA-based Android devices
[*] Caution: Take a backup of your data before following the steps above, as flashing or installing the firmware could wipe the personal data from the device.#How to use Intel Flash Tool E2