Howto flash stockrom for LG AKA

Howto flash stockrom for LG AKA

Step1 :Download and install LG Mobile DriverĀ 

Step2 :Download and install LG Flash Tool 2014 – KDZ Flash Software

Step3 :Download the stockrom for your LG AKA.

Step4 :Place device in download mode. Power device off, while holding volume up, plug computer usb cable into your phone.

Step5 :Run the LG Flash tool .exe file

Step6 :Select “CDMA” as device type and “diag” as phone mode.

Step7 :Use the KDZ file you previously downloaded.

Step8 :Use” Normal Flash” to flash without losing any data. This is to fix system errors. Flashing anything besides the same current firmware will result in a boot loop.

Step9 :Use “CSE Flash” to wipe all data and flash stock firmware onto your device. Use this if you are soft bricked, boot looping, downgrading, sideloading update or just need to go back to 100% stock.

Step10 :Click start and choose your country and language in the pop up window.

Hit ok and don’t touch anything until it says 100%.

Be the first to comment

Leave a Reply

Your email address will not be published.