Home / Stockrom / other smartphone / Q-R-S-T-U / Sict IV 700 flash files stockrom

Sict IV 700 flash files stockrom

below the direct link to download stockrom (firmware) file from google driver or oneclouddriver or ….
stockrom contains flash tools , driver and tutorials …

Download :

IV 700 SW File-F010_DZ_GXT03_130520_1950_6531.rar


Howto flash stockrom android:

Guide flash rom smartphone android with SP Flash tools

Download SP Flash tools

Download Usb Driver

1. download and extract the stockrom on your computer

2. install all driver for your mobile , and run SP flash tools

3. after run SPflash tools , you load the scatter file from the stockrom folder.

4. connect your phone to the computer via USB cable

5. click on upgrade/download button in the SP flash tools

6. waiting and when Gren ring will appear at the end of successfull flash . done and goodluck .

Guide flash rom smartphone android with QPST soft

Download QPST 

1.Connect your phone to PC and let the driver install
2.Install QPST
3.Open QPST Configuration -> Add new port -> Select the com port of your device -> exit
4.Go to Start -> All Programs -> QPST eMMC Software Download open the tool -> Check program boot loaders -> Browse for the device com port
5.Click Load XML def and browse for rawprogram_unsparse.xml in folder ROM
6.Click Load Patch def and browse for patch0.xml in folder ROM
7.Check the search path 2 and browse for the folder ROM
11.Now click download, wait for the download to finish (it never finish but it also detects for a new driver, and that’s important)
and it will search for the new hardware found, install the driver

Guide Flash rom smartphone adnroid with SP MDT software

_Download Tools_

Download Usb Driver

1). Turn off the smartphone. Cable is not connected to the computer.

2). Remove the battery and insert it again

3). Connect your phone to a computer cable. The operating system detects a new device

4). Disconnect the cable from the computer.

5). Run SPMultiPortFlashDownloadProject.exe

6). Choose File> Open File Agent download and specify the file MTK_AllInOneDA.bin (it is in the folder SP_MDT).

7). Click Scatter File and select the MT6580_Android_scatter.txt file (it’s in the folder with the rom).

8). Click “Start all”.

9). Connect your phone to a computer cable. The program should see and blink. If the phone is not detected, then unplug it from the computer, remove and insert the battery (if the battery is removable) and reconnect it to the computer.

10). After (OK) click Stop and disable any phone. 11). Completed.

Guide flash rom android smartphone with FactoryDownload/UpgradeDownload/ResearchDownload

Download Tools

Download Usb Driver

1 Unpack ROM and extract file .pac

2 Run UpgradeDownload or FactoryDownload or ResearchDownload, connect your android device to the computer

3 Click on “Load packet” and add the .pac

4 Click on “Start”

5 During the flashing your mobile will restart automatically

6 Finish

About Mobilehelpfull.com

Previous Sict IV 4000 flash files stockrom
Next Sict iV156 flash files stockrom

Leave a Reply

Your email address will not be published. Required fields are marked *